Every Housing Choice Voucher unit has to pass a Housing Quality Standards (HQS) inspection. The inspector checks that the property meets basic safety, health, and livability standards. If you know what they look for and how the process runs, you can get the unit ready ahead of time and plan around the timeline.
What Are Housing Quality Standards?
Housing Quality Standards are federal requirements for all properties rented through the Housing Choice Voucher program. They focus on habitability and safety: things like adequate heat, water, working plumbing, electrical systems, and safe living conditions. Looks and luxury don't count. The question is whether the unit is basic, livable housing.
The standards are the same for a single-family home, a condo, or a unit in a multi-family building. All rental properties must pass HQS inspection before a tenant can move in and lease payments can begin.
Initial Inspection Timeline
When you indicate interest in accepting a Housing Choice Voucher tenant, the PHA will schedule an initial HQS inspection. A typical timeline:
- Scheduling (1-2 weeks): After you express interest and send in the property information, the PHA schedules an inspection. Your local PHA will contact you to set a time that works for both of you.
- Inspection Day (1-2 hours): An HQS inspector walks through the whole property and looks at every major system and space.
- Results (1-2 weeks): The PHA provides you with a written inspection report. If the property passes, you're cleared to move forward. If there are failures, you receive a detailed list of what needs to be fixed.
- Repairs & Re-inspection (2-4 weeks): If repairs are needed, you complete them and request a re-inspection. This typically happens within 2-4 weeks, though the timeline depends on the complexity of repairs needed.
Once the property passes inspection, you can execute the HAP lease and the tenant can move in. HAP covers the unit from the first day of the lease term. The first payment can take a few weeks while the PHA signs the HAP contract, and it covers those earlier days.
What Inspectors Check
The inspection covers the major systems and spaces in the unit. Inspectors typically look at the following.
Exterior and Grounds
- Roof condition and absence of leaks
- Exterior walls in good repair, no excessive peeling paint
- Stairs, walkways, and porches safe and accessible
- Grading and drainage appropriate to prevent water damage
- Fencing secure and safe where present
Heating and Cooling
- Adequate heating system that can reach 68°F throughout the unit in winter
- Air conditioning not required, but if present, must be in working order
- Heating equipment safely installed and vented
- Thermostat in place and functional
Plumbing and Water
- Hot and cold water available from all fixtures
- Water temperature adequate (between 110°F and 120°F)
- No leaks in pipes or under sinks
- Sinks, tubs, and toilets functional and in good repair
- Drainage systems working properly
- No signs of water damage or mold in bathrooms
Kitchen
- Sink with hot and cold water
- Refrigerator provided and in working order (if required by local PHA)
- Stove or cooktop in working order
- Adequate counter and cabinet space
- Flooring in good repair, not excessively worn
Electrical System
- Service panel and wiring in safe condition
- Adequate outlets in all rooms
- No exposed wiring or hazardous conditions
- Lighting fixtures in working order in all rooms
- GFCI outlets in kitchen and bathrooms
Safety and Hazards
- No lead paint hazards (or documented lead-safe practices in older homes)
- No pest infestation or pest droppings
- Carbon monoxide detectors if applicable
- Working smoke detectors on each level
- Safe railings on stairs and balconies
- No hazardous materials stored improperly
Floors, Walls, and Ceilings
- Floors not excessively worn, torn, or damaged
- Walls and ceilings in good repair, no excessive damage
- No signs of mold, water damage, or significant moisture
- Windows and doors operable and in good repair
Common Reasons Properties Fail Inspection
Most well-maintained rentals pass HQS inspection. When one fails, it's usually for something on this list:
- Heating issues: Furnace not heating to 68°F, thermostat missing or non-functional
- Plumbing problems: Leaky faucets, water temperature too cold, non-working toilet or drain
- Electrical hazards: Missing outlets, exposed wiring, broken light fixtures
- Paint hazards: Lead paint hazards in homes built before 1978 that haven't been properly addressed
- Safety issues: Missing smoke detectors, broken railings, pest infestation
- Moisture and mold: Evidence of water damage, mold growth, or severe dampness
- Structural damage: Soft floors, ceiling damage, broken windows
Many of these are simple fixes. A broken toilet, missing smoke detectors, or a dead thermostat can typically be repaired within days or weeks. Bigger jobs like major plumbing or electrical work or lead paint remediation take longer, but they're still doable.
Periodic Inspections
Once your lease is active and the tenant has moved in, the property must pass periodic HQS inspections. Federal rules require the PHA to inspect at least every two years (every three years for some small rural PHAs), and some PHAs choose to inspect every year (24 CFR 982.405). Periodic inspections follow the same standards as initial inspections.
Periodic inspections typically come with little notice (often just a few days to a week). You don't need to be there, but the property should be in good condition and the inspector has to be able to get in. Many landlords ask the tenant to let the inspector in, and as the owner you have the right to do that.
If the property fails a periodic inspection, you get a list of deficiencies and a deadline to fix them, usually 30 days. If the repairs aren't done, the PHA can reduce or terminate the HAP subsidy, so keep up with maintenance between inspections.
Preparing Your Property for HQS Inspection
You don't need to do major renovations to pass HQS. Focus on the basics:
- Test all systems: Make sure heating, plumbing, and electrical all work properly
- Install smoke detectors: Put battery-operated detectors on each level and test them
- Fix obvious damage: Replace broken windows, repair loose railings, patch holes in walls
- Clean thoroughly: While cleanliness isn't part of HQS, a clean property gives a good first impression
- Address water issues: Fix leaky faucets, repair water-stained ceilings, address any signs of mold
- Check the heat: Have your furnace serviced and make sure it can heat the unit to 68°F
- Document lead paint remediation: If your property was built before 1978, have your documentation of lead-safe practices or professional remediation ready
If Your Property Fails Initial Inspection
Plenty of properties fail the first time, usually over minor deficiencies that are easy to fix. What happens next:
- You receive a written report detailing all deficiencies
- You have a set timeframe to complete repairs (typically 30-60 days)
- You tell the PHA the repairs are done, and it reinspects (some PHAs accept photos or other proof instead)
- The inspector re-checks the previously failed items
- If all repairs are complete, the property passes and you can move forward with the lease
If you're not sure whether a specific repair is required, ask your local PHA. They can usually walk you through any deficiency on the report.
Inspection Fees
A PHA can't charge you for the inspection before the lease starts or for a regular inspection during the tenancy, and it can't charge the tenant for any inspection (24 CFR 982.405(g)-(h)). The one fee it may charge you is a reasonable reinspection fee, and only when you told the PHA a deficiency was fixed (or the repair deadline passed) and the reinspection shows something you were responsible for still isn't fixed. You can't pass that fee on to the tenant. Ask your local PHA whether it charges one and how much.
Accessibility and Inspector Access
Inspectors need full access to the property, including all bedrooms, bathrooms, appliances, heating systems, and crawlspaces. If a tenant is living in the unit, you have the right to require the tenant to allow inspector access. This is part of the lease agreement, so tenants must grant access for HQS inspections.
For an initial inspection before a tenant moves in, make sure the property is unlocked and the inspector can get into every room.